Toggle Menu

IB2MAC 1985

7th International Brick and Block Masonry Conference

Melbourne, Australia

February 1985



CONTENTS

 

Organizing Committee:

George W.A. Thomson

President; General Manager, Selkirk Brick Pty. Ltd.

 

John C. Scrivener

Chairman; Professor of Building, Department of Architecture and Building, University of Melbourne

 

Tom McNeilly

Deputy Chairman; Research Director, Brick Development Research Institute

 

John McC. Doyle

Committee Member; Executive Director, Victorian Brick Manufacturers Association

 

David A. Gairns

Committee Member; Lecturer, Department of Architecture and Building, University of Melbourne

 

Bruce R. Kean

Committee Member; Chief General Manager, Boral Cyclone Pty. Ltd.

 

Ian A. Paxton

Committee Member; General Manager - Southern Regions. PGH Clay Bricks and Pavers

 

I. Ross Wilson

Committee Member; Operations Manager, Clifton Brick Holdings Ltd.

 

Pamela Thomas

Conference secretary; Conference Planner

 

 

PROCEEDINGS

 

ISBN: 0-9589969-0
Eds: Tom McNeilly, John C. Scrivener:
FULL PROCEEDINGS BOOK: Volume 1 (0.35 GB)
FULL PROCEEDINGS BOOK: Volume 2 (0.33 GB)



Review papers

 

[001]     BAKER L.R., GAIRNS D.A., LAWRENCE S.J., SCRIVENER J.C. (AUS):
Flexural Behaviour of Masonry Panels - A State of the Art

[002]     HUGHES D., BALLINGER J. (AUS):
Experience in the Development and Promotion of Passive Energy Efficient Houses

[003]     McNEILLY T.H. (AUS):
Moisture Expansion of Clay Bricks: an Appraisal of Past Experience and Current Knowledge

[004]     PAGE A.W., BROOKS D.S. (AUS):
Load Bearing Masonry - A Review



History and restoration

 

[005]     BENZONI G.M., FONTANA A. (ITA):
Load Carrying Capacity of Masonry Piers with Openings

[006]     LEGGERI B., MESSINI M., VASARRI V. (ITA):
Brick in Building of the Dome of Santa Maria del Fiore in Florence

[007]     LEWIS M.B. (AUS):
From Hollow Brick to Brick Veneer

[008]     ROSSI P.P. (ITA):
Flat-Jack Test for the Analysis of Mechanical Behaviour of Brick Masonry Structures

[009]     SHEPPARD P.F. (YUG):
In-situ Test of the Shear Strength and Deformability of an 18th Century Stone-and-brick Masonry Wall

[010]     WILLINGHAM A. (AUS):
Conservation of Brickwork and the Historic Fabric: Blast Cleaning of Brickwork



Manufacture

 

[011]     FREY E., BRIESEMANN D. (DEU):
More Recent Calculations of the Primary Energy Costs of Autoclaved Aerated Concrete

[012]     HANDLE F. (DEU):
The Brick Factory in the Year 2000

[013]     NIMITYONGSKUL P., RAJANI P. (THA):
Mechanical Properties of Cementitious Materials Made from Lime and Rice Husk Ash

[014]     USAI G. (ITA):
Utilization of Sulcis Coal Ash in the Production of Masonry Bricks



Resistance to water, frost and salt

 

[015]     BALLANTYNE E.R. (AUS):
Water Permeance of Double Leaf Masonry Walls with Cavity Insulation

[016]     BARONIO G., BINDA L. (ITA), CHAROLA A.E. (USA):
Deterioration of Bricks with and without Perforations due to Salt Crystallization

[017]     HEIMAN J.L. (AUS):
Rising Damp and Salt Attack in Old Masonry Buildings

[018]     KUNG J.H. (CAN):
Frost Durability of Canadian Clay Brick

[019]     SOMSIRI S. (THA), ZSEMBERY S., FERGUSON J.A. (AUS):
A Study of Pore Size Distributions in Fired Clay Bricks in Relation to Salt Attack Resistance



Brick growth and differential movement

 

[020]     AMENY P., JESSOP E.L. (CAN):
Masonry Cladding: A Report on Causes and Effects of Failures

[021]     BABA A. (JPN):
Safety of Brick Masonry Finishings Anchored in Reinforced Concrete Structures under Differential Movements

[022]     BORCHELT J.G. (USA):
Brick Veneer and Structural Frames: Dimensional Tolerances. Design Errors and Construction Problems

[023]     BOWMAN R. (AUS):
A Theoretical Reconsideration of Certain Aspect of Brick Expansion

[024]     FENTON G.A., SUTER G.T. (CAN):
Differential Movement Between Clay Brick Veneer and Concrete Block in Loadbearing Masonry Highrise Structures

[025]     GOLDFINCH W.(AUS):
Moisture Expansion: Update and Review

[026]     HAMID A.A., BECICA I.J., HARRIS H.G. (USA):
Performance of Brick Masonry Veneers

[027]     KELLER H., SUTER G.T. (CAN):
Deformation Measurements on a Loadbearing Masonry Highrise Structure in Canada

[028]     NIEMINEN P. (FIN):
Strain Caused by Temperature in a Masonry Structure

[029]     ZSEMBERY S., SHARPE K., VUCKO J. (AUS):
Determination of the Expansion of Non-kiln-fresh Bricks



Thermal performance

 

[030]     CANAVESIO G., OSSOLA F., TUBI N. (ITA):
Building Performance and Global Energy Contents of Curtain Walls

[031]     DELSANTE A. (AUS):
A Comparison of the Thermal Performance of Three Types of Domestic Masonry Construction

[032]     YOSHIKAWA S., KATO S. (JPN):
Heat Insulation of Brick Construction in Japan



Paving and non-building uses

 

[033]     PAWSEY M.R., MORTLOCK B. (AUS):
Brick Paving in a Landscaping Plan

[034]     SAKSENA H.S., KHANNA V.K. (IND):
Brick Masonry Culverts



Brick facings

 

[035]     CERAGIOLI G., CANAVESIO G., DI CESARE G. (ITA):
The Use of Tiles in Simplified Construction Methods

[036]     ITO M., KATO S. (JPN):
Acoustic Brick Panel

[037]     SEKI K., UEHARA H. (JPN):
Brick-Surfaced Concrete Block

[038]     WATANABE T., SAKURAI M. (JPN):
Special Bricks and Siding Boards for Facing Wooden Construction



Prefabrication

 

[039]     DICKEY W.L. (USA):
Pre-fabrication in Southern California, USA

[040]     HATZINIKOLAS M.A., PACHOLOK R. (CAN):
Prefabricated Masonry



Numerical models

 

[041]     ANDREAUS U., CERADINI G., CERONE M., D'ASDIA P. (ITA):
Masonry Columns Under Horizontal Loads: A Comparison Between Finite Element Modelling and Experimental Results

[042]     ANDREAUS, U., CERONE M., D'ASDIA P., IANNOZZI F. (ITA):
A Finite Element Model for the Analysis of Masonry Structures under Cyclic Actions

[043]     BERNARDINI A., CASELLATO A., MODENA C., VITALIANI R. (ITA):
Post -Elastic Behaviour of Plain Masonry Shear Walls

[044]     GU Y., JIANG T., YANG Z., ZHANG B., YIN J., MA W. (CHN):
Application of the Finite Element Method to the Design of Wall Beams

[045]     MOTTA F., D'AMORE E. (ITA):
Numerical Modelling of the Structural Behaviour of Masonry Buildings

[046]     SAWKO F., ROUF M.A. (GBR):
A Numerical Model for Masonry



Variability of masonry properties

 

[047]     BEAL D.L. (AUS):
Statistical Variation of Brickwork Tests on Multistorey Structural Brickwork

[048]     LAWRENCE S.J. (AUS):
Random Variations in Brickwork Properties

[049]     MANN W., ZAHN J. (DEU):
Statistical Evaluation of Compression Tests on Masonry Walls Constructed in Gas-Concrete Blocks

[050]     XU B., QIAN Y. (CHN):
The Relation Between the Coefficients of Variation of the Compressive Strengths of Units, Mortar and Brickwork



Compressive behaviour

 

[051]     ABRAMS D.P., NOLAND J.L., ATKINSON R.H. (USA):
Response of Clay-Unit Masonry to Repeated Compressive Forces

[052]     ATKINSON R.H., NOLAND J.L., ABRAMS D.P. (USA):
A Deformation Failure Theory for Stack-bond Brick Masonry Prisms in Compression

[053]     BABA A. (JPN):
A Suggested Concept for Predicting Strength of Ungrouted Masonry Prisms

[054]     BINDA L., BARONIO G. (ITA):
Alteration of the Mechanical Properties of Masonry Prisms due to Aging

[055]     DRYSDALE R.G., WONG H.E. (CAN):
Interpretation of the Compressive Strength of Masonry Prisms

[056]     KIRTSCHIG K. (DEU):
On the Failure Mechanism of Masonry Subjected to Compression

[057]     LOO Y., THAYAPARAN S. (THA):
Compressive Strength of Thai Brick Columns

[058]     MANN W., LEICHER E. (DEU):
Investigations on the Buckling Effect in Masonry Walls Restrained in the Floor Slabs

[059]     PAGE A.W., MARSHALL R. (AUS):
The Influence of Brick and Brickwork Prism Aspect Ratio on the Evaluation of Compressive Strength

[060]     PAYNE D.C., BROOKS D.S., SVED G. (AUS):
The Strength of Rectangular Wall Panels Carrying Vertical Load

[061]     PUME D. (CSK):
Compressive Behaviour of Masonry with Longitudinal Holes in Bed Joints

[062]     SHI C. (CHN):
The Influence of Joint Thickness and the Water Absorption of Bricks on Compressive Strength of Brickwork

[063]     SHRIVE N.G. (CAN):
Compressive Strength and Strength Testing of Masonry



Concentrated loads

 

[064]     ALI S., PAGE A.W. (AUS):
Concentrated Loads on Brickwork - A Preliminary Study

[065]     BROWN R.H., DALRYMPLE G.A. (USA):
Performance of Retrofit Embedments in Brick Masonry

[066]     MANN W., PFEIFER M. (DEU):
Investigations on the Stresses in Masonry Walls Subjected to Concentrated Loads

[067]     TANG D-X. (CHN):
Testing and Analysis of the Bearing Strength of Brick Masonry



In-plane behaviour

 

[068]     BACKES H-P. (DEU):
Tensile Strength of Masonry

[069]     DAWE J.L., McBRIDE R.T. (CAN):
Experimental Investigation of the Shear Resistance of Masonry Panels in Steel Frames

[070]     DAWE J.L., YONG T.D. (CAN):
An Investigation of Factors Influencing the Behaviour of Masonry Infill in Steel Frames Subjected to In-Plane Shear

[071]     DHANASEKAR M., PAGE A.W., KLEEMAN P.W. (AUS):
The Behaviour of Brick Masonry Under Biaxial Stress with Particular Reference to Infilled Frames

[072]     FISHER K., HASELTINE B.A., HODGKINSON H.R. (GBR):
Investigation of the Strength of Flat Arches in Brickwork

[073]     GANZ H.R., THURLIMANN B. (CHE):
Plastic Strength of Masonry Shear Walls

[074]     LONGFOOT B.R. (AUS):
In-plane Bending of Clay Brick Walls

[075]     LU X-Z., CHEN X-Z (CHN):
Behaviour and Application of Metric Modular Hollow Brick Masonry

[076]     MATTONE R., PIZZETTI G. (ITA):
Behaviour of Masonry with Fibre Reinforced Mortar

[077]     PORTER M.L., WOLDE-TINSAE A.M., AHMED M.H. (USA):
Behaviour of Composite Brick Walls



Out-of-plane behaviour

 

[078]     ANDERSON C. (GBR):
Tests on Walls Subjected to Uniform Lateral Loading and Edge Loading

[079]     BEAL D.L. (AUS):
Concrete Block Masonry Bond Strength

[080]     DE VEKEY R.C. (GBR):
The Influence of Mortar Type on the Flexural Strength of Masonry

[081]     DRYSDALE R.G., GAZZOLA E. (CAN):
Influence of Mortar Properties on the Tensile Bond Strength of Brick Masonry

[082]     EDGELL G.J., DE VEKEY R.C. (GBR):
The Design of Walls Containing Bed Joint Reinforcement to Resist Lateral Loads

[083]     EDGELL G.J., DE VEKEY R.C. (GBR):
The Robustness of the Domestic House. Part 2: Wind Suction Tests on Gable Walls

[084]     HELD L., ANDERSON C (GBR):
Effect of Fines Content of Sand on Tensile Bond

[085]     MULLINS P.J., O'CONNOR C. (AUS):
The Use of Steel Reinforcement Systems to Improve the Strength and Stiffness of Laterally Loaded Brick Walls

[086]     YTTRUP P.J. (AUS):
Strength of Earth Masonry (Adobe) Walls Subjected to Lateral Wind Forces



Prestressed masonry

 

[087]     HUIZER A., LOOV R.E. (CAN):
Post-tensioning of a Single-Wythe Clay Brick Masonry Wall

[088]     ROUMANI N., PHIPPS M.E. (GBR):
The Shear Strength of Prestressed Brickwork I and T sections

[089]     WALKER P., SINHA B.P. (GBR):
Behaviour of Partially Prestressed Brickwork Beams



Reinforced masonry

 

[090]     BABA A. (JPN), BERESFORD F.D. (AUS):
Carbonation of Reinforced Masonry

[091]     BEAUCHAMP D. (AUS):
Some Victorian Examples of Structural Brick Masonry

[092]     DICKEY W.L. (USA):
Hollow Face Brick for Wind and Seismic Resistance

[093]     EDGELL G.J., TEMPLETON W. (GBR):
Reinforced Brickwork Columns

[094]     GERRARD C., MACINDOE L. (AUS):
Predicted Response of Reinforced Brickwork to In-plane Tensile Loading

[095]     KINGSLEY G.R., TULIN L.G., NOLAND J.L. (USA):
Parameters Influencing the Quality of Grout in Hollow Clay Masonry

[096]     LO Y., QIAN P. (CHN):
Research on Earthquake Proof Hollow Blocks

[097]     LU N-Y., FENG M-S., SHI G-B., MO T-B. (CHN):
The Behaviour and Strength of Brick and Reinforced Concrete Composite Wall Beams

[098]     OHLER A. (DEU):
Behaviour of Reinforced Brick Masonry Columns with Different Slenderness Ratios

[099]     PADHYE P.Y., BAKER L.R. (AUS):
Partially Reinforced Concrete Masonry Walls Subjected to Lateral Loads

[100]     SHI C. (CHN):
The Probability-based Limit State Design of Brick Masonry with Reinforced Network

[101]     ZELGER C. (DEU):
Proposal for Masonry Design in Common Action with Concrete and Reinforcement



Seismic response - analysis

 

[102]     ADHAM S.A., EWING R.D., KARIOTIS J.C., JOHNSON A.W. (USA):
Interaction Between Brick Masonry Buildings and Their Roof Diaphragms During Earthquakes

[103]     BAGGIO C., CESTELLI GUIDI M., PICCARRETA F. (ITA):
Effect of Non-structural Wall Elements on Seismic Vulnerability of Reinforced Concrete Buildings

[104]     KARIOTIS J.C., EWING R.D., JOHNSON A.W. (USA):
Predictions of Stability for Unreinforced Brick Masonry Walls Shaken by Earthquakes

[105]     KELLY T.E., MAYES R.L., MOGHTADERI-ZADEH M. (USA):
An Ultimate Strength Design Procedure for Clay Brick Masonry Shear Walls

[106]     LIU J., HE L. (CHN):
Analysis of Seismic Response of Multi-Storey Brick Masonry Buildings Under Vertical Ground Motion

[107]     QIAN P-F., QIAN D. (CHN):
Analysis of Earthquake Damage to Brick Structures



Seismic response - tests

 

[108]     ADHAM S.A. (USA):
Static and Dynamic Out-of-Plane Response of Brick Masonry Walls

[109]     ALLEN D., LAPISH E.B. (NZL):
Joint Reinforcement in Single Wythe Ceramic Masonry Walls

[110]     BAGGIO C., TERZARIOL R. (ITA):
Seismic Resistance of Reinforced Masonry Simple Buildings

[111]     CALVI G.M., MACCHI G., ZANON P. (ITA):
Random Cyclic Behaviour of Reinforced Masonry Under Shear Action

[112]     GAO B. (CHN):
Fly Ash Block Wall Under Horizontal Shear Loading

[113]     HEGEMIER G.A., MURAKAMI H., HAGEMAN L.J. (USA):
Response of Reinforced Masonry to Planar Hysteretic Stresses

[114]     KUBOTA T., OKAMOTO S., NISHITANI Y., KATO S. (JPN):
A Study on Structural Behavior of Brick Panel Walls

[115]     TOMAZEVIC M., ZARNIC R. (YUG):
The Effect of Horizontal Reinforcement on the Strength and Ductility of Masonry Walls at Shear Failure

[116]     UMEMURA H., KAMIMURA K., OKADA T., OKAMOTO S., YAMAZAKI Y. (JPN):
U.S. - Japan Joint Earthquake Research Program Involving Large-Scale Experiments on Masonry Building Structures

[117]     ZARNIC R., TOMAZEVIC M. (YUG):
Study of the Behaviour of Masonry Infilled Reinforced Concrete Frames Subjected to Seismic Loading



Strengthening against earthquake

 

[118]     KARIOTIS J.C., EWING R.D., JOHNSON A.W. (USA):
Strength Determination and Shear Failure Modes of Unreinforced Brick Masonry with Low Strength Mortar

[119]     KARIOTIS J.C., EWING R.D., JOHNSON A.W., ADHAM S.A. (USA):
Methodology for Mitigation of Earthquake Hazards in Unreinforced Brick Masonry Buildings

[120]     LEUCHARS J.M. (NZL):
Seismic Strengthening and Upgrading of Masonry Buildings in New Zealand

[121]     LEUCHARS J.M. (NZL):
The Use of Sprayed Concrete in the Strengthening of Earthquake Risk Buildings

[122]     PLECNIK J.M., HOWARD J.J., FOGARTY J.H., PARRA V.S. (USA):
Strengthening of Unreinforced Masonry Buildings

[123]     SHEPPARD P.F., TERCELJ S. (YUG):
Determination of the Seismic Resistance of an Historical Brick-Masonry Building by Laboratory Tests of Cut-Out Wall Elements



Masonry codes

 

[124]     CHEN X-Z. (CHN):
The Development of the Chinese Design Code for Brick Masonry Structures

[125]     GIUFFRE A., MODENA C. (ITA):
Reinforced Masonry in Seismic Areas. Studies for the New Italian Code

[126]     HART G.C, ENGLEKIRK R.E., SABOL T.A. (USA):
Limit State Design of Masonry in the United States

[127]     HU C-K. (CHN):
Chinese Research on the Reliability of Brick Masonry

[128]     JOHNSTON V.R. (AUS):
The New Australian Standard Masonry Corle

[129]     PRIESTLEY M.J.N. (NZL):
Ultimate Strength Design of Masonry Structures - The New Zealand Masonry Design Code

[130]     TAWRESEY J., KARIOTIS J.C., NOLAND J.L. (USA):
A Review of the New Masonry Chapter of the Uniform Building Code

[131]     WECK T-U. (FIN):
Research on Masonry Structures in Finland